Viking 200kW Resistive Load Bank

•        INTEGRATED PLC CONTROLLER WITH COLOUR TOUCH SCREEN
  
•         IP65 STAINLESS STEEL LOAD RESISTORS
  
•          CIRCUIT BREAKERS ON EACH LOAD GROUP
  
•          CONTACTOR SWITCHING IN 5KW STEPS
  
•          LOW-WATTS DENSITY LOAD RESISTORS
  
•          OVER TEMPERATURE & FAN FAIL PROTECTION
  
•          IP55 FAN MOTOR & ALUMINIUM COOLING FAN
  
•          INSULATED RESISTOR COMPARTMENT
  
•          2MM ZINC COATED STEEL BODY
  
•          STAINLESS STEEL GRILLE AND FASTENERS
  

With Installation base: H:1500mm W:1055mm D:1055mm

UNIT WEIGHT:    Standard : 382 KG       Install base: 405 KG         With wheel Kit: 428 KG

LOAD RATING: 200KW @ 400 volt AC +/- 10%, 50Hz, 3 wire connection (Other voltages and Hz ratings available)

LOAD STEPS: 5KW load increments.

DIGITAL METERING: Backlit LCD for Volts, Amps KW, KVA, KWH, PF with RS-485 Mod-Bus communication

RESISTOR WIRING: 200 degree ’C’ rated silicone insulated

LOAD CABLE CONNECTIONS: 40 x 10mm copper busbar with 2 x M12 bolted connections per phase

FAN MOTOR: 5.5 KW, 400 VOLT +/- 10%, 50Hz ,4 pole TEFC, IP54. DOL start with thermal overload

FINISH: Grey/black UV stabilised Powder Coat with stainless

OPTIONAL EQUIPMENT

WHEEL KIT: Heavy duty 125mm ball bearing swivel type wheels (4) with brakes (2) and mounting hardware kit
INSTALLATION BASE: Steel ’C’ section mounting rails for permanent installation (black powder coat finish)
DIGITAL METERING: Backlit LCD for Volts, Amps KW, KVA, KWH, PF with RS-485 Mod-Bus communication
AUXILLARY POWER: External control/fan power inlet with panel mounted changeover switch (wiring only)
FAN REVERSE : Fan motor reversing switch to change air flow direction when supply phase rotation is incorrect
POWERLOCK: Powerlock twist type shielded connectors for incoming power supply (400 amp rated)