Viking 600kW Resistive Load Bank

• INTEGRATED PLC CONTROLLER WITH COLOUR TOUCH SCREEN
  
• IP65 STAINLESS STEEL LOAD RESISTORS
  
• CIRCUIT BREAKERS ON EACH LOAD GROUP
  
• CONTACTOR SWITCHING IN 5KW STEPS
  
• LOW-WATTS DENSITY LOAD RESISTORS
  
• OVER TEMPERATURE & FAN FAIL PROTECTION
  
• IP55 FAN MOTOR & ALUMINIUM COOLING FAN
  
• INSULATED RESISTOR COMPARTMENT
  
• 2MM ZINC COATED STEEL BODY
  
• STAINLESS STEEL GRILLE AND FASTENERS    

SPECIFICATIONS

DIMENSIONS:   Standard : H:1965mm W:1425mm D:1225mm     Forklift/Roll frame: H:2225mm W:1600mm D:1400mm

UNIT WEIGHT:  Standard : 745 KG       with forklift/Roll framebase:1080 KG

LOAD RATING: 600KW @ 400 volt AC +/- 10%, 50Hz, 3 wire connection (Other voltages and Hz ratings available)

LOAD STEPS: Switching in 5KW load increments.

DIGITAL METERING: Backlit LCD for Volts, Amps KW, KVA,

KWH, PF with RS-485 Mod-Bus communication

RESISTOR WIRING: 200 degree ’C’ rated silicone insulated

LOAD CABLE CONNECTIONS: 50 x 10mm Copper busbar with 2 x M12 bolted connections per phase

FAN MOTOR: 7.5 KW, 400 VOLT +/- 10%, 50Hz ,4 pole, IP54. DOL start with thermal overload

FINISH: Grey/black UV stabilised Powder Coat with stainless steel discharge grille and fasteners

ENCLOSURE: IP54 (control panel door closed)

OPTIONS: 

FORK LIFT FRAME: Heavy duty 5mm folded steel, hot dip galvanised forklift base

AUXILLARY POWER: External control/fan power inlet socket with panel mounted changeover switch

FAN REVERSE : Fan motor reversing switch to change air flow direction when supply phase rotation is incorrect

POWERLOCK: Powerlock twist type shielded connectors for incoming power supply (400 amp rated)

CABLE HANGERS: Folding hanger brackets (2) for flexible cable storage